Menu
Cart 0

Blaze Performance AToM V2 Intake System (Typhoon) - VW/Audi MQB 1.8T/2.0T

Blaze Performance

  • $ 550.00
  • Save $ 5000


Blaze + EQT North America

Upgrades from certain intakes may necessitate revision to boost strategy. Please submit a datalog to your calibrator for review to ensure tune optimization. 

*Fitment Note: Due to the large ducting to scoop maximum amounts of air, certain aftermarket hoods that have center vents may have clearance issues. We recommend checking out Vaarticus' install video as a reference for clearance.

This intake system features a full-width air deflector to ram as much air as possible into the engine through the massive 120mm air filter!

Significant gains have been shown on Typhoon and Vortex powered vehicles when compared to a competitor's intake system. (As shown below on a Vortex powered cars)

This intake system features a full-width air deflector to ram as much air as possible into the engine through the massive 120mm air filter!

Significant gains have been shown on Vortex powered vehicles when compared to a competitor's intake system.

Some examples demonstrating the comparisons: 



Reducing the restrictions in the induction system allows for a lower Wastegate Duty Cycle to achieve boost pressure which leads to more power and cooler charge temperatures. It also allowed for higher boost levels on setups that were previously limited on the intake side. 

Reducing the restrictions in the induction system allows for a lower Wastegate Duty Cycle to achieve boost pressure. On limited setups that are out of boost, upgrading the intake system can increase power levels by as much as 50-60whp. 

The Blaze Performance Turbo Inlet Flange features a 76mm inside diameter at the neck and tapers down to fit perfectly with any 3" machined compressor cover.

Features
  • 100mm (4") Case Outlet
  • 4-Ply Steel Reinforced Turbo Inlet Pipe
    (100mm Inlet ID, 76mm Outlet ID)
  • 160mm Air Accumulator / Heat Shield
  • Rubber Seal for a tight fit to the hood
  • Reverse Mounted 120mm Washable Cone Filter
  • Full-Width Cowl for optimum airflow
Vehicle Fitment
  • VW Golf 7 & 7.5 GTI & Clubsport, Golf R, GLI
  • Passat 2.0 TSI B8 2015+ VW Arteon 2.0 TSI 2017+, Tiguan (2nd Gen)
  • Audi: A3 2.0 TSI 2013+ 8V, S3 2013+ 8V, Audi TT 2.0 TSI (8S)
Installation

For Installation instructions click HERE


We Also Recommend

Customer Reviews

Based on 1 review Write a review