VW/Audi MQB 2.0T (Mk7+/8V+)
HomeTB Performance Crossmember Brace - MQB 2.0T A3/S3 (8V+)
The factory crossmember brace is a flimsy grouping of stamped sheet metal pieces. While a good start, significant chassis deflection occurs in this area which translates to unpredictable handling and...
TB Performance Rear Mid Chassis Brace - MQB 2.0T A3/S3 (8V+)
Does your exhaust rattle on your oem stamped steel brace? Replace that oem unit with a stiffer and better performing brace that will clear your aftermarket exhaust while still providing...
TB Performance Rear Traction Bar - MQB 2.0T A3/S3 (8V+)
The rear end of the Audis tends to get a little loose especially as the mod list grows and power becomes more ample. The Rear Arm Bar is a surefire...
TB Performance Adjustable Front Strut Bar - MQB 2.0T/e 2.0T
Quite possibly the best handling bolt on out there for the Audi A3&S3! Improve grip, traction, steering response and engine bay appeal with this fully adjustable front strut bar! This lightweight...
TB Performance Adjustable Rear Strut Bar(Trunk Brace) - MQB 2.0T A3/S3 (8V+)
When your car is in a corner that is hard enough, the rear end will start to "float". this type over oversteer is difficult to predict and manage as its...
TB Performance 2 Point Traction Bar - MQB 2.0T/e 2.0T
Want to end torque steer and wheel hop? Do you want to tighten up your Audi's steering!? OF COURSE YOU DO! We hand craft our traction bars out of rectangular tube...
TB Performance Torque Gusset Traction Bar (Manual Only Limited Supply) - MQB 2.0T/e 2.0T
The Torque Gusset Front Traction Bar is a chassis brace that ties the entire front crossmember to the A arm suspension to cut down on bushing and chassis deflection. This...
TB Performance Adjustable Rear Strut Bar - MQB 2.0T/e 2.0T
When the Jetta is in a corner that is hard enough, the rear end will start to float. this type over oversteer is difficult to predict and manage as its...
TB Performance Torque Gusset Traction Bar - MQB 2.0T GLI (Mk7+)
The Torque Gusset Front Traction Bar is a chassis brace that ties the entire front crossmember to the A arm suspension to cut down on bushing and chassis deflection. This...
TB Performance Rear Traction Bar - MQB 2.0T GLI (Mk7+)
The rear end of the Jetta tends to get a little loose especially as the mod list grows and power becomes more ample. The Rear Arm Bar is a surefire...
TB Performance Rear Mid Chassis Brace - MQB 2.0T GLI (Mk7+)
Does your exhaust rattle on your oem stamped steel brace? Replace that oem unit with a stiffer and better performing brace that will clear your aftermarket exhaust while still providing...
TB Performance Crossmember Brace - MQB 2.0T GLI (Mk7+)
The factory crossmember brace is a flimsy grouping of stamped sheet metal pieces. While a good start, significant chassis deflection occurs in this area which translates to unpredictable handling and...