EQT Vortex Turbocharger (VW MQB Mk7 GTI, Golf R, Audi S3)
We are excited to announce the release of our new turbo upgrade for the MQB platform! The new EQT Vortex is a complete bolt-on turbo that is manufactured with all brand new components. The housings are modeled after the OEM IS38 turbocharger for proper fitment, but they are all brand new and original castings made and machined for the specific wheels we use. The turbine is a TD06SL2 wheel measuring at 61mm/54mm with a 10cm housing. The compressor is a custom billet wheel measuring at 53mm/71mm. The entire turbo is manufactured, assembled, and precision balanced in a state of the art facility. The EQT Vortex is good for 450whp on pump gas and over 500whp on race gas or E85. Note that upgraded high pressure and low pressure fuel pumps are recommended to take full advantage of this turbo.
When developing this turbo upgrade, we were aiming for a good balance of response and overall power potential so that the turbo would be a pleasure to drive on the street as well as on track. As a result, the EQT Vortex offers excellent spool and response throughout the powerband along with a very flat torque curve that carries nearly to redline. We also sized this turbo to be a perfect match for the stock engine internals and control systems. The EQT Vortex makes most of its power in the 27-28psi range which allows it to work very well on pump gas and stay within range of the stock MAP sensors. Check out the dyno chart below which shows the EQT Vortex on 91 Octane and on an E30 blend as well as the same car on the stock IS38 turbo. The setup on the car remained exactly the same aside from the turbo kit and tuning. This test car still has the stock cat-back and a catted downpipe, so there is plenty more power to be had!
Here is a chart showing how quickly the EQT Vortex can spool. This was done on the road in 4th gear (2015 Golf R DSG) on E30. You can see that the turbo hits 27psi right at 3000RPM and holds it to redline with ease. You can also see that the Intake Air Temperature barely moves through the entire pull. This shows how efficient the turbo is at these boost/power levels.
To compliment the additional flow of the EQT Vortex, we developed a package which includes the all new turbocharger, over-sized turbo muffler delete, over-sized turbo discharge pipe, and a complete set of high quality re-enforced silicone intercooler hoses. This package allows the EQT Vortex to perform optimally and is highly recommended.
Fitment: All Mk7 GTI, Golf R and Audi S3.
- $1800 for the EQT Vortex turbocharger only
- $2000 for the complete kit including turbo, muffler delete, discharge pipe, and silicone hoses
We Also Recommend